+ 30 Day In Home 100% Refund Period
+ 5 Year Parts & Labor Warranty with Every Signature Edition Upgrade
+ 100% GUARANTEED to beat ANYTHING else on the market!
Nothing we sell ever comes back.
We don't even have to advertise. Once our clients experience for themselves the extreme high performance & "bang for the buck" we deliver, they keep coming back as funds permit.
The Upgrade Company would not continue to be A+ rated on the nationwide BBB algorithm month after month unless we were delivering on our promises.
Fusion Flex Flexible Power Amplifier
The Fusion Flex Amplifier offers a combination of audiophile sound quality and features far beyond what you might expect from a “little amplifier”. With its beefy toroidal transformer power supply and classic short signal path Class A/B output topology, the Fusion Flex Amp delivers pristine power, even into difficult loads. However, what really sets the Fusion Flex Amp apart from the pack is the wide variety of convenience and automation features that make it the go-to amp for high quality “zone amp” and remote amplifier applications.
Dual line level inputs let you connect two separate audio sources; and you can switch between them using the front panel controls, the remote control, or the IR and RS-232 remote control inputs – or you can set the Fusion Flex Amp automatically switch to the active input! You can turn the Fusion Flex Amp on manually via remote control, or using the standard trigger input – or it can be set to switch on automatically when it senses an audio signal. The digitally controlled analog volume control offers precise control, near perfect channel tracking, and very low noise and distortion. You can operate the Fusion Flex Amp from the front panel, or from any of the remote control options, and a row of LEDs let you see where your volume is set from across the room. You can also use the buffered loop outputs to daisy chain together more Fusion Flex Amps to easily drive additional zones without signal loss or degradation. The Fusion Flex Amp can be run from any standard 115 VAC or 230 VAC power line, and has a very quiet thermally-activated fan that only runs when absolutely necessary, and its diminutive size makes it easy to find a home for it in any cabinet or rack.
The Fusion Flex Amp really is the perfect solution – whether you simply need a high quality remote controlled integrated amplifier for a small bedroom or office system, or you need a fully featured zone amp that can provide really excellent sound quality, and integrate easily with your other remote controlled devices and audio systems.
The Fusion Flex Amplifier: Flexible power
- Channels: 2
- Inputs (stereo; line level): 2 (manually or automatically switched)
- Power Output (both channels driven): 50 watts/channel @ 8 ohms; 75 watts/channel @ 4 ohms
- Signal to Noise Ratio: 95 dB
- Frequency Response: 20 Hz to 20 kHz +/- 0.08 dB
- Power requirements: 115 VAC / 230 VAC (+ / - 10%); selectable by rear panel switch
Unboxed: 8-1/2 " wide; 3" high (including feet);15" deep (including connectors)
Boxed: 13" wide x 7" high x 18" deep
Unboxed: 11.2 lbs
Boxed: 15 lbs
Write a reviewYour Name:
Your Review: Note: HTML is not translated!
Rating: Bad Good
Page information last updated: 06/05/2020
Disclaimer: We believe but do not guarantee that the information on this website is correct at the time of publication.